|
LATHES
(1)
DOOSAN 670L LATHE
26.3" X 70.87"
4.06 BORE
PROGRAMMABLE TAIL STOCK
(1)
HAAS SL20 CNC LATHE 10”
X 20” 2.062” BORE WITH BAR FEEDER & PARTS
CATCHER. PROGRAMMABLE TAIL STOCK.
4000-RPM SPINDLE.
(1)
OKUMA HOWA ACT4 2 AXIS CNC
LATHE
(1) Engine Lathe 20" x 80"
(1)
ENGINE LATHE 26" x 120"
multiple 3 & 4 JAW CHUCK / 5C COLLET CLOSER
____________________________________________________________________________________________________________________________
HORIZONTAL MILLS
(1)
KBN135 BORING MILL
TABLE SIZE mm (in) ___________________ 2,000
X 1,800 (78.7 X 70.9)
MAX LOAD ON PALLET kg (lb) ___________
10,000 (22,046)
TRAVEL (X/Y/Z) mm (in) _______________ 3,000
X 2,000 X 1,600 (118.1 X 78.7 X 63)
RAPID TRAVERSE (X/Y/Z) m/min (ipm) _ 8 / 8 /
8 (315 / 315 / 315)
TAPER NT_____________________________ #50
SPINDLE SPEED________________________ 2,000
SPINDLE POWER kW (HP) _____________
22/18.5(30/25)
TOOL CAPACITY EA ___________________ 40
CONTROLLER _________________________ FANUC
16iM
(1)
MAZAK HORIZONTAL MACHINING CENTER MODEL
H-630
6 PALLETS -
Pallet size - 24.7" X 24.7"
X-Axis Travel - 39.4"
Y-Axis Travel - 31.5"
Z-Axis Travel - 29.5"
Number of tools in ATC - 120
Spindle Taper - CAT
#50
Spindle Speeds - 4500 RPM
Spindle Motor - 20/30 HP
Table Load Capacity - 2460 Lbs
Table Indexing - 1 Degree
Rapids Traverse (X,Y,Z) - 787 ipm
Approximate Machine Weight - 38,000 Lbs
____________________________________________________________________________________________________________________________
VERTICAL
MILLS
(1)
HAAS VF-8 CNC VERTICAL MILLING
CENTER 64"X40"X30” :
10,000-RPM 30HP SPINDLE & PROGRAMMABLE & thru the spindle
COOLANT.
(1) HAAS VF-3 20" X 40" X 25” CNC VERTICAL MILLING CENTER:
7500-RPM 20HP SPINDLE & PROGRAMMABLE
COOLANT.
(1) HAAS VF-0 20" X 16" X 20” CNC VERTICAL MILLING CENTER:
15,000-RPM 20HP SPINDLE & PROGRAMMABLE COOLANT.
(1)
HAAS VF-2ss 30"X16"X20”
CNC VERTICAL MILLING CENTER:
12,000-RPM 30HP SPINDLE, GLASS SCALES, & Programmable COOLANT.
(1)
HAAS VF-3ssyt 40"X26"X25” CNC VERTICAL MILLING CENTER:
12,000-RPM 30HP SPINDLE, GLASS SCALES, & PROGRAMMABLE
COOLANT.
(1) BRIDGEPORT MILL WITH ROTARY TABLES
____________________________________________________________________________________________________________________________
4TH
AXIS ROTARY TABLES
(Simultaneous WITH HAAS MILLS)
(1)
HA5CS-CNCB ROTARY 4TH AXIS
Super High Speed 725 deg/sec Servo
Indexer w/manual collet closer. For small parts
machining, high-speed drill & tap
operations or repetitive
parts where fast
cycle times are important
(1)
HAAS HRT 160 ROTARY 4TH AXIS
(1)
HAAS HRT 210 ROTARY 4TH AXIS
(1)
HAAS
HRT 210SHS-CNC-HD 210 ROTARY 4TH
AXIS DETAILS: 210
mm (8.27") Servo Rotary Table w/super-high-speed 360 deg/sec
indexing.
Nearly six times faster than the
standard HRT 210, the 210SHS greatly increases productivity with rapids to
360 deg/sec and feedrates to 270 deg/sec.
____________________________________________________________________________________________________________________________
5TH
AXIS ROTARY TABLE
(Simultaneous WITH HAAS MILLS)
(1)
TRT160
____________________________________________________________________________________________________________________________
Saws
(1)
S-20A Series III
60 degree One-way
Miter Capability
1" x 14'10" blade
17¾" Heavy Duty
Cast Band Wheels
3 Hp Direct Drive
Motor with A/C Inverter offering Variable Band Speed from 45-330 SFM
Cast Iron Guide
Arms. Adjustable Idler Guide Arm, supported by Linear Bearings
Safety Door
Interlocks
Heavy Duty Vise
with Quick Locking Lever System
Pre-Set Carbide
Guide Inserts (no adjustment needed)
Manual Blade
Tension with LED Display on Control Panel
Blade Breakage
Switch
Ergonomically
positioned "Swing Away" Control Panel
Flood Coolant
System and Wash Down Hose
(2)
AUTOMATIC Horizontal Band Saw
(1) ROLLIN Vertical Band Saw
____________________________________________________________________________________________________________________________
Fabrication
(1)
Syncrowave® 250 DX
Stick (SMAW)
TIG (GTAW)
(1) MILLERMATIC 250 WIRE WELDER (MILLER)
(1) Manual BENDING MACHINE
____________________________________________________________________________________________________________________________
DRILL PRESSES
(2) 1/2" CHUCK, 36" Vertical Travel
____________________________________________________________________________________________________________________________
Grinders
(1) SURFACE Grinder 8" x 18"
(2) Bench Grinders
____________________________________________________________________________________________________________________________
Miscellaneous
(2) BELT SANDERS
(4) ANGLE PLATES
____________________________________________________________________________________________________________________________
Inspection room
(1) 18” x 24” surface plate
(1) 24” height gauge
(1) 9” digital caliper
(4) 6” digital calipers
(1) 24” digital calipers
(1) set gauge blocks
(1) set gauge pins up to .875 dia.
(2) dial bore gauges (.0001” increments)
(1) set of Mitutoyo individual micrometers 0-12" with standards (.0001”)
(1) Starret 0-9” depth micrometers
(2) set of telescoping gauges
(1) BROWN & SHARP 14” OPTICAL Comparator
|
HOME